Cuttlebug or Xyron Personal Cutting Machine
+9
Karen R
poppytree
mikki
Andrea
Jenny M
LoopyLou
tuftytwo
Scotty
Christine 1
13 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Cuttlebug or Xyron Personal Cutting Machine
Hi folks,
I have been thinking about getting one of the above but not sure what will be best. Does anyone else have either or both & what do you think of them?
I did think about getting the cuttlebug but not sure as only seen a couple of templates that i like, but the Xyron machine i do like the templates that they cut out so not sure
What does everyone else think, any good & bad points on them both before i go ahead & get them.
Cheers
Christine
I have been thinking about getting one of the above but not sure what will be best. Does anyone else have either or both & what do you think of them?
I did think about getting the cuttlebug but not sure as only seen a couple of templates that i like, but the Xyron machine i do like the templates that they cut out so not sure
What does everyone else think, any good & bad points on them both before i go ahead & get them.
Cheers
Christine
Re: Cuttlebug or Xyron Personal Cutting Machine
I have the Revolution....hard to get dies for, shame because it is a brill machine
I will be honest I regret not getting the Cuttlebug
I have seen some amazing results with it
I also have the Cricut and LOVE it
The cartridges seem expensive at first view but you do get a LOT in each one
Well worth it
And you can now download templates for that too
Can't really speak for the Xyron, hope that helps a little bit
I will be honest I regret not getting the Cuttlebug
I have seen some amazing results with it
I also have the Cricut and LOVE it
The cartridges seem expensive at first view but you do get a LOT in each one
Well worth it
And you can now download templates for that too
Can't really speak for the Xyron, hope that helps a little bit
Re: Cuttlebug or Xyron Personal Cutting Machine
I have a Cuttlebug and I love it but have used it mainly for embossing - I like the texture it gives to cards. I only have a couple of cutting dies have not made any use of them yet.
I bought the Cuttlebug because it was recommended by so many of my crafting friends and I am very pleased with it.
Pam xx
I bought the Cuttlebug because it was recommended by so many of my crafting friends and I am very pleased with it.
Pam xx
tuftytwo- New Moo
- Number of posts : 27
Location : Haywards Heath, West Sussex
Registration date : 2008-11-14
Re: Cuttlebug or Xyron Personal Cutting Machine
I got a cuttlebug a few months ago... £50 with free postage... PM me if you would like the link hun xx
I think it is fab, but it is the first machine I have tried so am a bit biased I suppose!!
I think it is fab, but it is the first machine I have tried so am a bit biased I suppose!!
Re: Cuttlebug or Xyron Personal Cutting Machine
I have the Cuttlebug too and yes its the only machine that I have too he he. I use it predominantly for the embossing but I do like the new Nestability shapes
Re: Cuttlebug or Xyron Personal Cutting Machine
I have a big shot and a wizard die cutting machine and the cuttlebug folders work a treat in both
Re: Cuttlebug or Xyron Personal Cutting Machine
I have the Cuttle bug and I wouldn't be without it, you can use the "Nestabiliys dies with it , I love the alphabetes, they are so stylish, I went for the Cuttle bug because you can use ordinary embossing die that you would normally need a light box for and the fact that you can use most of the other brand dies with it.
xx
Mikki
xx
Mikki
Re: Cuttlebug or Xyron Personal Cutting Machine
I have the Bigshot, I think the main difference between
that and the Cuttlebug is space, the cuttlebug folds up
whereas the Bigshot dosnt, both great machines and
will do virtually the same jobs
Jayne
that and the Cuttlebug is space, the cuttlebug folds up
whereas the Bigshot dosnt, both great machines and
will do virtually the same jobs
Jayne
Guest- Guest
Re: Cuttlebug or Xyron Personal Cutting Machine
I have a Cuttlebug - its my favourite buy of the year and I wouldn't be without it. I use Sizzlets, Cuttlebug and Quickuts dies in it and absolutely love the embossing and cut & emboss folders. (It replaced my Sizzix sidekick which was free with a magazine subscription a few years ago) Hope to get some nestabilities soon.
I have just started experimenting using brass stencils too - so much quicker than a light box and stylus. The reason I chose it was for its size and price. I use a Bigshot at the craftshop where I teach but they have the space
I have just started experimenting using brass stencils too - so much quicker than a light box and stylus. The reason I chose it was for its size and price. I use a Bigshot at the craftshop where I teach but they have the space
Re: Cuttlebug or Xyron Personal Cutting Machine
Cuttlebug for me as well! Love the alphabets and have quite a few embossing folders as well.
Karen R- Moo'ver
- Number of posts : 2075
Age : 63
Location : Nottinghamshire
Registration date : 2008-09-05
Re: Cuttlebug or Xyron Personal Cutting Machine
I have just bought a set of nestabilities
large scalloped ovals, they cut really
good have to get an acrylic mat for the
embossing though
Jayne
large scalloped ovals, they cut really
good have to get an acrylic mat for the
embossing though
Jayne
Guest- Guest
Re: Cuttlebug or Xyron Personal Cutting Machine
I have the old Sizzix machine which weighs a ton and you need to put so much pressure on it. Also the quickutz hand held one and Revolution. But Martin bought me the Cuttlebug for my 60th birthday and use it most days for both embossing and cutting. Love it It is on my worktop and I just fold up the sides and push it back when I'm not using it. The revolution is good too but a smaller platform. I bought the new 12" platform but haven't really used it I should really put some of these on ebay and the Cuttlebug does them all
Re: Cuttlebug or Xyron Personal Cutting Machine
I have a Sizzix and a Cuttlebug and much prefer my bug, also got a Cricut and to be honest that gets used a lot more than the bug but wouldn't be without my Cuttlebug
Re: Cuttlebug or Xyron Personal Cutting Machine
I don't think I would get the use out of a cricut. Wouldn't know what to use it for - I tend to do a lot of stamping Thinking of getting some nestibilities (maybe santa will bring me some)
Re: Cuttlebug or Xyron Personal Cutting Machine
I have the revoultion and use both nestabilities and cuttlebug embossing folders in it with the 12" plate. See the link I put in Craft Help.
Re: Cuttlebug or Xyron Personal Cutting Machine
Scotty wrote:I have the Revolution....hard to get dies for,
Sent you a pm Sadie
Re: Cuttlebug or Xyron Personal Cutting Machine
Craftworker wrote:I don't think I would get the use out of a cricut. Wouldn't know what to use it for - I tend to do a lot of stamping Thinking of getting some nestibilities (maybe santa will bring me some)
Snap! My first love is stamping and I also hope Santa brings some nestibilities
Re: Cuttlebug or Xyron Personal Cutting Machine
Oh Jacky you naughty, naughty womanCraftworker wrote:Scotty wrote:I have the Revolution....hard to get dies for,
Sent you a pm Sadie
I have been such a good girl lately too but I have resisted temptation
Oh believe me girls once you have the Cricut you will use it
Re: Cuttlebug or Xyron Personal Cutting Machine
[/quote
Oh believe me girls once you have the Cricut you will use it [/quote]
That is very true i got mine out the other day ive not used it for ages and i made a load of tags for my friends Cancer charity. She sold everyone and asked for more for this week .
Oh believe me girls once you have the Cricut you will use it [/quote]
That is very true i got mine out the other day ive not used it for ages and i made a load of tags for my friends Cancer charity. She sold everyone and asked for more for this week .
Re: Cuttlebug or Xyron Personal Cutting Machine
Myself and Jayne worked it out one day if you brought all the punches or dies of the different sizes you can diecut from the Cricut cartridges bearing in mind most have around 40/50 seperate images on them, the Animal Kingdom one has 48 different animals and with all the different sizes and functions it would cost around £20,000 if they were all around £5 each die or punch but 5.5 inch punches would cost way more than that so at between £30-£50 for a cartridge I don't think they are bad value at all even taking the cost of the Cricut in to consideration!!
Re: Cuttlebug or Xyron Personal Cutting Machine
I second that, I have spent about €400 on
punches if I had the cricut with george and
basic shapes cart would of only cost me €200
Jayne
punches if I had the cricut with george and
basic shapes cart would of only cost me €200
Jayne
Guest- Guest
Re: Cuttlebug or Xyron Personal Cutting Machine
Told you
And there are no probs for family about birthday/Mothers' Day/Christmas pressies
Just make sure they have an up-to-date list of your cartridges
Here is a link to a PDF file that has the shows the handbook for one cartridge, one that I hope Santa brings me
Keep scrolling and be amazed:-
http://www.cricut.com/res/handbooks/WalkmyGarden.pdf
And I know a shop that sells the machine and all the bits:-
www.thecraftycow.co.uk
And there are no probs for family about birthday/Mothers' Day/Christmas pressies
Just make sure they have an up-to-date list of your cartridges
Here is a link to a PDF file that has the shows the handbook for one cartridge, one that I hope Santa brings me
Keep scrolling and be amazed:-
http://www.cricut.com/res/handbooks/WalkmyGarden.pdf
And I know a shop that sells the machine and all the bits:-
www.thecraftycow.co.uk
Re: Cuttlebug or Xyron Personal Cutting Machine
I have got that 1 Sadie and love it but the Animal Kingdom one so far is my favourite
To be honest Jacky I really don't think you would regret it if you did buy it, I managed to get mine 2nd hand but it was in pristine condition but I would if I had the money get the Expression not the original one.
To be honest Jacky I really don't think you would regret it if you did buy it, I managed to get mine 2nd hand but it was in pristine condition but I would if I had the money get the Expression not the original one.
Re: Cuttlebug or Xyron Personal Cutting Machine
The Expression is THE one to get that's for sure
I got the impression that it was just for bigger cut outs but it also goes a lot smaller than the ordinary one which would be VERY handy
I got the impression that it was just for bigger cut outs but it also goes a lot smaller than the ordinary one which would be VERY handy
Page 1 of 2 • 1, 2
Similar topics
» Cutting machines
» C is for Scissors - I use them for CUTTING (anything crafty)
» Cuttlebug sandwich ....
» Using cuttlebug folders with Revolution
» C is for Scissors - I use them for CUTTING (anything crafty)
» Cuttlebug sandwich ....
» Using cuttlebug folders with Revolution
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
Sun Mar 31, 2013 11:39 pm by Marion
» Happy Birthday Craftworker
Mon Oct 01, 2012 8:44 pm by Craftworker
» Tuesday 17h
Thu Jul 19, 2012 4:21 pm by topgran
» Monday 16th July
Wed Jul 18, 2012 12:35 pm by topgran
» Happy Birthday Lady of Kent
Mon Jul 16, 2012 9:31 am by cubbie66
» 2nd time lucky
Fri Jul 06, 2012 12:33 pm by topgran
» Im stopping with the birthday club
Fri Jun 29, 2012 2:44 pm by Andrea
» Im stopping with the birthday club
Fri Jun 29, 2012 2:42 pm by Andrea
» Sunday
Wed Jun 20, 2012 3:07 pm by poppytree